Description
Screw the socket in to the ground or sand with the bar supplied,
Can be easy relocated again and again,
Suitable for use with any rotary lines or parasols,
Fits from 17mm – 55mm Diameter poles
Instructions:
1. Remove the hanging tab
2. Insert the bar supplied through the top of the socket
3. Screw the socket into the ground
4. If the ground is too hard, wind the socket back slightly and pour water into the top hole and leave for a while (Repeat if required)
5. Finish screwing the socket into the ground
6. Suitable for pole diameters from 17mm – 55mm
7. Can be used with any rotary lines, small and large parasols, camping equipment, signs or sports nets
8. Secure the pole tightly by tightening the top nut
